Event codes in the F60 range will only appear if EIP parameters (N30-N39) are enabled on Ultra™ units.
Use the information in this table for assistance if you see any of these codes.
| F60 | Network link loss | Network connection lost while running. Check network connections. |
| F61 | Loss of assembly | Incorrect assembly value entered. Acceptable values are 20, 21, 70, 71, 100, 101, 150, or 151. |
| F62 | Error writing to assembly | Incorrect format or size of data written to assembly. |
| F63 | Network Test Fault | User/programmable test fault. |
| F64 | Bit fault | Cycle power. Contact PE if issue persists. |
| F65 | Explicit Message Timer | Explicit net command error. Contact PE. |